Lighting Designer Leo Herrmann reported a positive creative response from using 20 GLP X4 Bars in the Dance Circus tent at the Zurich Openair Festival, with his design company Lumenlabor.
“I did not change the basis of the design theme from 2015,” stated Leo Herrmann. “And yet I wanted to go a step further and take the whole thing to the outside. The design, itself, is based on a ‘light tunnel’, which works from a front to rear perspective on the LED wall at the back of the stage. Here I was looking for a device which offered me the possibility to drive all the LEDs individually, in order to incorporate the set border into the existing pixel mapping. I found it within GLP’s X4 series. I had first seen the X4 Bar at a Milky Chance show and I knew right away that it was what I was looking for. So I specified 20 fixtures,” he continued.
In the Dance Circus, acts included Boyznoise, Booka Shade, Digitalism and Lexy & K-Paul. “12 of the X4 Bar 20’s were vertically integrated into the suspended ladder brackets to the left and right of the stage. These formed the lateral end. The advantage here was that I had the tilt function to pull the entire picture across the width, making the stage look enormous in size. The remaining eight X4 Bars were placed on the front edge of the stage, forming the lower end, or more precisely the bottom of the tunnel. So I had the possibility to fold the beam off the floor and side walls of the tunnel. I could put a light curtain onto the stage, which together with the individual pixels made a wonderful effect. Thanks to the zoom and tilt functions, there were quite new possibilities for programming. Together with pixel mapping this became the ultimate tool for EDM.” Hermann explained.
In conclusion, Leo Herrmann confirmed, “The X4 Bars will certainly have a permanent place in the design of the next edition of the Zurich Open Air!” Feedback Show Systems & Service GmbH from Stolberg served as the technical service provider.